POLIMIN RM-4 REPAIR MORTAR FINISH polymer-cement repair putty for repairing and restoring cracks, sinkholes and leveling other defects on concrete and reinforced concrete structures: bridges, overpasses, overpasses, retaining walls, etc., which are subject to intense mechanical aggressive environments. Repair putty is applied to surfaces in a layer of up to 5 mm before finishing them.
Thanks to the improved formula, the product provides:
• high crack resistance
• high strength and adhesion to the base
• rapid strength gain in the early stages of hardening
• high hydrophobicity of the surface
• high frost resistance
| The size of the filler, mm | tо 0,5 |
| Proportions of water for mixing | 0,15-0,17 l / 1 kg 3,75-4,25 l / 25 kg |
| Mixture consumption per 1 mm layer, approx | 2,0 kg/m2 |
| Application thickness, mm | tо 5 |
| Time of use, min, no less | 30 |
| Bending tensile strength, MPa, not less than: 7 days 28 days |
4 7,5 |
| Compressive strength, MPa, not less than: 1 day 7 days 28 days |
12 25 35 |
| Frost resistance, cycle, no less | 300 |
| The temperature of the preparation of the solution, as well as the basics of the environment during work | from +5 ºС tо +30 ºС |
| Operating temperature | from -50 ºС tо +80 ºС |
| Packaging | paper bags: 25 kg |
POLIMIN RM-4 REPAIR MORTAR FINISH polymer-cement repair putty for repairing and restoring cracks, sinkholes and leveling other defects on concrete and reinforced concrete structures: bridges, overpasses, overpasses, retaining walls, etc., which are subject to intense mechanical aggressive environments. Repair putty is applied to surfaces in a layer of up to 5 mm before finishing them.
Thanks to the improved formula, the product provides:
• high crack resistance
• high strength and adhesion to the base
• rapid strength gain in the early stages of hardening
• high hydrophobicity of the surface
• high frost resistance
| The size of the filler, mm | tо 0,5 |
| Proportions of water for mixing | 0,15-0,17 l / 1 kg 3,75-4,25 l / 25 kg |
| Mixture consumption per 1 mm layer, approx | 2,0 kg/m2 |
| Application thickness, mm | tо 5 |
| Time of use, min, no less | 30 |
| Bending tensile strength, MPa, not less than: 7 days 28 days |
4 7,5 |
| Compressive strength, MPa, not less than: 1 day 7 days 28 days |
12 25 35 |
| Frost resistance, cycle, no less | 300 |
| The temperature of the preparation of the solution, as well as the basics of the environment during work | from +5 ºС tо +30 ºС |
| Operating temperature | from -50 ºС tо +80 ºС |
| Packaging | paper bags: 25 kg |
