POLIMIN RM-3 REPAIR MORTAR MULTI is a fine-grained polymer-cement repair mixture for restoring and repairing local damage to reinforced concrete and concrete building structures. It is used for leveling the surfaces of structures and correcting their defects, including reinforced concrete structures of swimming pools, tanks, etc. Layer thicknesses from 5 mm to 30 mm per application. Do not use for repairing cement-lime, cement-sand, gypsum, etc. plasters, as plaster on brick, stone, lightweight concrete, etc. bases.
Thanks to the improved formula, the product provides:
• high crack resistance
• high strength and adhesion to the base
• rapid strength gain
• vapor permeability.
| The size of the filler, mm | 2,0 |
| Proportions of water for mixing: l / 1 kg l / 25 kg |
14-0,15 3,50-3,75 |
| Mixture consumption per 1 mm layer, kg/m², approx | 2,0 |
| Application thickness, mm | 5...30 |
| Time of use, min, no less | 30 |
| Bending tensile strength, MPa, days , not less than: 7 28 |
4,5 8 |
| Compressive strength, MPa, days , not less than: 1 7 28 |
5 15 25 |
| Adhesion strength to the base, MPa, no less | 2,0 |
| Frost resistance, cycle, no less | 200 |
| Shrinkage, no more than mm/m | 1,2 |
| The temperature of the preparation of the solution, as well as the basics of the environment during work, from ...to, ºС | +5 ... +30 |
| Operating temperature, ºС, from...to | -50 ... +80 |
POLIMIN RM-3 REPAIR MORTAR MULTI is a fine-grained polymer-cement repair mixture for restoring and repairing local damage to reinforced concrete and concrete building structures. It is used for leveling the surfaces of structures and correcting their defects, including reinforced concrete structures of swimming pools, tanks, etc. Layer thicknesses from 5 mm to 30 mm per application. Do not use for repairing cement-lime, cement-sand, gypsum, etc. plasters, as plaster on brick, stone, lightweight concrete, etc. bases.
Thanks to the improved formula, the product provides:
• high crack resistance
• high strength and adhesion to the base
• rapid strength gain
• vapor permeability.
| The size of the filler, mm | 2,0 |
| Proportions of water for mixing: l / 1 kg l / 25 kg |
14-0,15 3,50-3,75 |
| Mixture consumption per 1 mm layer, kg/m², approx | 2,0 |
| Application thickness, mm | 5...30 |
| Time of use, min, no less | 30 |
| Bending tensile strength, MPa, days , not less than: 7 28 |
4,5 8 |
| Compressive strength, MPa, days , not less than: 1 7 28 |
5 15 25 |
| Adhesion strength to the base, MPa, no less | 2,0 |
| Frost resistance, cycle, no less | 200 |
| Shrinkage, no more than mm/m | 1,2 |
| The temperature of the preparation of the solution, as well as the basics of the environment during work, from ...to, ºС | +5 ... +30 |
| Operating temperature, ºС, from...to | -50 ... +80 |
