POLIMIN RM-1 REPAIR MORTAR CONTACT is a polymer-cement adhesive and protective mixture for creating an adhesive layer on concrete surfaces and reinforced concrete structures, as well as creating anti-corrosion protection of the surface of reinforcement before applying repair mixtures. It is recommended for use in the repair of bridges, columns, retaining walls, water tanks, etc. It is used when performing complex repairs of concrete and reinforced concrete structures, the destruction of which was a result of mechanical loads and corrosion processes.
Thanks to the improved formula, the product provides:
• rapid strength development
• high strength and adhesion to the base
of metal reinforcement, concrete and reinforced concrete
• high frost resistance.
| Proportions of water for mixing: l / 1 kg l / 25 kg |
0.25-0.27 6.25-6.75 |
| Consumption of the mixture, kg/m², approximately:
- corrosion protection - adhesion layer |
2.0 5.0 |
| Time of use, min, not less than | 60 |
| Tensile strength when bending at the age of 28 days, not less than | 5 |
| Compressive strength at the age of 28 days, not less than | 30 |
| Compressive strength at the age of 28 days, not less than | 2 |
| Frost resistance, cycle, not less than | 300 |
| Temperature of the solution preparation, as well as the environment during operation, ºС, from...to | +5...+30 |
| Operating temperature, ºС, from...to | -50...+80 |
POLIMIN RM-1 REPAIR MORTAR CONTACT is a polymer-cement adhesive and protective mixture for creating an adhesive layer on concrete surfaces and reinforced concrete structures, as well as creating anti-corrosion protection of the surface of reinforcement before applying repair mixtures. It is recommended for use in the repair of bridges, columns, retaining walls, water tanks, etc. It is used when performing complex repairs of concrete and reinforced concrete structures, the destruction of which was a result of mechanical loads and corrosion processes.
Thanks to the improved formula, the product provides:
• rapid strength development
• high strength and adhesion to the base
of metal reinforcement, concrete and reinforced concrete
• high frost resistance.
| Proportions of water for mixing: l / 1 kg l / 25 kg |
0.25-0.27 6.25-6.75 |
| Consumption of the mixture, kg/m², approximately:
- corrosion protection - adhesion layer |
2.0 5.0 |
| Time of use, min, not less than | 60 |
| Tensile strength when bending at the age of 28 days, not less than | 5 |
| Compressive strength at the age of 28 days, not less than | 30 |
| Compressive strength at the age of 28 days, not less than | 2 |
| Frost resistance, cycle, not less than | 300 |
| Temperature of the solution preparation, as well as the environment during operation, ºС, from...to | +5...+30 |
| Operating temperature, ºС, from...to | -50...+80 |
