POLIMIN RX-1 FAST MIX is a fast-hardening polymer-cement mixture for quick anchoring of plastic and metal parts in concrete, brick, stone masonry, quick repair of cracks, as well as elimination of water leaks in buildings and structures. The mixture allows filling of gaps with a thickness of 5 mm to 20 mm. The material is used in the installation process: plumbing and bathroom furniture, sockets and electrical appliances, window grilles.
Thanks to the improved formula, the product provides:
• fast anchoring
• fast strength development
• no shrinkage
• water and frost resistance
| Water Proportions for Mixing, L/25 kg: -Plastic consistency - Liquid consistency |
5.0-6.6 6.25 8,25 |
| Mixture consumption per 1 liter of volume, kg | 1.7 |
| Application thickness, mm: | 5...20 |
| Usage time, minutes (approx.): | 4 |
| Flexural strength, MPa (minimum): After 6 hours After 1 day After 28 days |
2,0 2,5 8,0 |
| Compressive strength, MPa (minimum): After 6 hours After 1 day After 28 days |
10 20 40 |
| Pull-out strength of the anchor, MPa (minimum): | 100 |
| Frost resistance, cycles (minimum): | 50 |
| Preparation temperature for the solution and the base, as well as ambient temperature during work, from ... to, ºС | +5 ...+30 |
| Operating temperature, from ... to, ºС | -50 ... +80 |
POLIMIN RX-1 FAST MIX is a fast-hardening polymer-cement mixture for quick anchoring of plastic and metal parts in concrete, brick, stone masonry, quick repair of cracks, as well as elimination of water leaks in buildings and structures. The mixture allows filling of gaps with a thickness of 5 mm to 20 mm. The material is used in the installation process: plumbing and bathroom furniture, sockets and electrical appliances, window grilles.
Thanks to the improved formula, the product provides:
• fast anchoring
• fast strength development
• no shrinkage
• water and frost resistance
| Water Proportions for Mixing, L/25 kg: -Plastic consistency - Liquid consistency |
5.0-6.6 6.25 8,25 |
| Mixture consumption per 1 liter of volume, kg | 1.7 |
| Application thickness, mm: | 5...20 |
| Usage time, minutes (approx.): | 4 |
| Flexural strength, MPa (minimum): After 6 hours After 1 day After 28 days |
2,0 2,5 8,0 |
| Compressive strength, MPa (minimum): After 6 hours After 1 day After 28 days |
10 20 40 |
| Pull-out strength of the anchor, MPa (minimum): | 100 |
| Frost resistance, cycles (minimum): | 50 |
| Preparation temperature for the solution and the base, as well as ambient temperature during work, from ... to, ºС | +5 ...+30 |
| Operating temperature, from ... to, ºС | -50 ... +80 |
