POLIMIN RM-2 REPAIR MORTAR BASE is a polymer-cement coarse-grained repair mixture for restoring the load-bearing capacity and repairing local damage to reinforced concrete and concrete building structures. It is used for leveling the surfaces of structures and correcting their defects, including reinforced concrete structures of swimming pools, tanks, etc. Layer thickness from 10 mm to 100 mm per application. In the case of leveling deeper irregularities, it is recommended to add up to 30% of fractionated granite screenings of fraction 2 – 5 mm. Do not use for repairing cement-lime, cement-sand, gypsum, etc. plasters, as plaster on bases made of brick, stone, lightweight concrete, etc.
Thanks to the improved formula, the product provides:
• high crack resistance
• high strength and adhesion to the base
• rapid strength gain.
| Filler size, mm, to | 5 |
| Proportions of water for kneading: l/ 1 kg l / 25 kg |
0,14-0,15 3,50-3,75 |
| Consumption of the mixture per 1 mm layer, kg/m², about: | 2,0 |
| Application thickness, mm | 10...100 |
| Time of use, min, not less | 30 |
| Bending tensile strength, not less than: 7/28 days | 4 / 6,5 |
| Compressive strength, not less than: 1/7/28 days | 15 / 25 / 40 |
| Adhesion strength to the base, MPa, no less | 2,0 |
| Frost resistance, cycle, no less | 200 |
| Shrinkage, no more than mm/m | 1,2 |
| Temperature of preparation of the solution, as well as the basis of the environment during work, ºС, from...to | +5...+30 |
| Operating temperature, ºС, from...to | -50...+80 |
POLIMIN RM-2 REPAIR MORTAR BASE is a polymer-cement coarse-grained repair mixture for restoring the load-bearing capacity and repairing local damage to reinforced concrete and concrete building structures. It is used for leveling the surfaces of structures and correcting their defects, including reinforced concrete structures of swimming pools, tanks, etc. Layer thickness from 10 mm to 100 mm per application. In the case of leveling deeper irregularities, it is recommended to add up to 30% of fractionated granite screenings of fraction 2 – 5 mm. Do not use for repairing cement-lime, cement-sand, gypsum, etc. plasters, as plaster on bases made of brick, stone, lightweight concrete, etc.
Thanks to the improved formula, the product provides:
• high crack resistance
• high strength and adhesion to the base
• rapid strength gain.
| Filler size, mm, to | 5 |
| Proportions of water for kneading: l/ 1 kg l / 25 kg |
0,14-0,15 3,50-3,75 |
| Consumption of the mixture per 1 mm layer, kg/m², about: | 2,0 |
| Application thickness, mm | 10...100 |
| Time of use, min, not less | 30 |
| Bending tensile strength, not less than: 7/28 days | 4 / 6,5 |
| Compressive strength, not less than: 1/7/28 days | 15 / 25 / 40 |
| Adhesion strength to the base, MPa, no less | 2,0 |
| Frost resistance, cycle, no less | 200 |
| Shrinkage, no more than mm/m | 1,2 |
| Temperature of preparation of the solution, as well as the basis of the environment during work, ºС, from...to | +5...+30 |
| Operating temperature, ºС, from...to | -50...+80 |
