Polimin WP-1 IMPREGNATOR – silicone-modified impregnation (impregnate) based on acrylic copolymer for protecting mineral surfaces from water and moisture. The material has high water repellency and good vapor permeability. It is used as a water-repellent impregnation (hydrophobic treatment) for mineral bases, such as concrete, cement, cement-lime, gypsum plasters, mineral, acrylic and other decorative plasters, natural stone, slate and brick to create an additional protective layer against rain, water, moisture.
| Number of application layers | 1-2 |
| Consumption depending on the application method and substrate absorption, kg/m² approximately | 0.10...0.20 |
| Drying time at a temperature of 20 °C and a relative humidity of not more than 65%, hours, up to | 2 |
| Temperature of the material, environment and substrate during application, °C, from...to | +5...+30 |
Polimin WP-1 IMPREGNATOR – silicone-modified impregnation (impregnate) based on acrylic copolymer for protecting mineral surfaces from water and moisture. The material has high water repellency and good vapor permeability. It is used as a water-repellent impregnation (hydrophobic treatment) for mineral bases, such as concrete, cement, cement-lime, gypsum plasters, mineral, acrylic and other decorative plasters, natural stone, slate and brick to create an additional protective layer against rain, water, moisture.
| Number of application layers | 1-2 |
| Consumption depending on the application method and substrate absorption, kg/m² approximately | 0.10...0.20 |
| Drying time at a temperature of 20 °C and a relative humidity of not more than 65%, hours, up to | 2 |
| Temperature of the material, environment and substrate during application, °C, from...to | +5...+30 |
