UNIVERSAL CEMENT-SAND MIXTURE 3 IN 1 М-150 • Polimin products

М-150 UNIVERSAL CEMENT-SAND MIXTURE 3 IN 1

MASONRY + PLASTERING + SCREED

Where to buy

FOR LAYING SCREED (10-60 MM)

FOR PLASTERING (10-20 MM)

WATER-, FROST-RESISTANT

PLASTIC

Description

It is used to produce high-strength masonry, screeds and plaster mortars (grade M150) for work both indoors and outdoors.

Characteristics

Proportions of water for mixing: - l / 1 kg - l / 25 kg	0.16-0.18 4.0-4.5
Shelf life of the solution for use, hours, at least	2
Consumption per 1 mm layer, kg/m2, approx	1.6
Compressive strength, not less than MPa	15
Layer thickness, mm	5-15
Frost resistance, cycles, no less	75
The temperature of the preparation of the solution, as well as the base and the environment during operation, from ... to, ºС	+5 ... +30

The manufacturer reserves the right to change the name, parameters, packaging design and other product characteristics without prior notice. The latest relevant information for consumers, as required by current legislation, is on the packaging.

It is used to produce high-strength masonry, screeds and plaster mortars (grade M150) for work both indoors and outdoors.

Proportions of water for mixing: - l / 1 kg - l / 25 kg	0.16-0.18 4.0-4.5
Shelf life of the solution for use, hours, at least	2
Consumption per 1 mm layer, kg/m2, approx	1.6
Compressive strength, not less than MPa	15
Layer thickness, mm	5-15
Frost resistance, cycles, no less	75
The temperature of the preparation of the solution, as well as the base and the environment during operation, from ... to, ºС	+5 ... +30