ШЦ-5
ШЦ-5 START-FINISH
CEMENT PLASTER WITH PERLITE
IT CAN BE APPLIED MANUALLY AND BY MACHINE
IT CONTAINS PERLITE
IT IS VAPOR-PERMEABLE
IT IS WATER- AND FROST-RESISTANT

It is used to perform high-quality plastering works on various mineral substrates (concrete, brick, etc.). It is recommended for plastering of facades and walls in premises with wet operation conditions. After hardening, it is a strong preparatory layer before the application of various cement putties or decorative plasters. It is recommended for both traditional manual application and mechanical application.

Mixing water proportions 0,22 - 0,26 L / 1 kg
5,5 - 6,5 L / 25 kg
Dry mix consumption per 1 mm layer, kg/m², minimum 1,3
The estimated thickness of the plaster layer, mm 5 - 30
The service life of the mortar mix, h, minimum 1
Strength of adhesion to the base, MPa, minimum 0,3
Compressive strength limit, MPa, minimum 5,0
The temperature of the base and ambient temperature during application, °С +5 ... +30
Shelf life, months 12
The manufacturer reserves the right without prior change of the name, parameters, packaging design and other product characteristics. The latest consumer information required by applicable law is found on the packaging.