The primer is intended for preparing various mineral substrates before further finishing – installing floors, fixing tiles, gluing thermal insulation, plastering and puttying, painting, etc. The primer is used to strengthen the top layer of various substrates, reduce and level its water absorption, as well as to improve the adhesion of the substrate to subsequent coating layers.
| Color in liquid state:
Color after drying: |
milky white
transparent |
| Primer consumption on weakly absorbing bases, g/m², from ... to | 0.1...0.2 |
| Density, kg/l | 1.01-1.03 |
| Drying time, h, no more than | 4 |
| Average coverage area from a canister, m²:
- 2 l - 5 l - 10 l |
30 50 100 |
| Actual VOC content, g/l | <15 |
| Operating temperature, °C | -30...+70 |
The primer is intended for preparing various mineral substrates before further finishing – installing floors, fixing tiles, gluing thermal insulation, plastering and puttying, painting, etc. The primer is used to strengthen the top layer of various substrates, reduce and level its water absorption, as well as to improve the adhesion of the substrate to subsequent coating layers.
| Color in liquid state:
Color after drying: |
milky white
transparent |
| Primer consumption on weakly absorbing bases, g/m², from ... to | 0.1...0.2 |
| Density, kg/l | 1.01-1.03 |
| Drying time, h, no more than | 4 |
| Average coverage area from a canister, m²:
- 2 l - 5 l - 10 l |
30 50 100 |
| Actual VOC content, g/l | <15 |
| Operating temperature, °C | -30...+70 |
