ШВ-1
ШВ-1 CLASSIC
CEMENT-LIME PLASTER (LAYER 10...20 MM)
APPLIED MANUALLY AMD BY MACHINE
CRACK RESISTANT
VAPOR-PERMEABLE
PLASTIC

It is used to perform high-quality plastering work on various mineral surfaces (concrete, brick, aerated concrete) indoors and outdoors for plastering walls protected from moisture. Recommended for both traditional manual and machine application. After hardening, it is a strong base for gypsum, acrylic putties and interior decorative plasters.
Thanks to the improved formula, the material provides:
• resistance to mold and fungi
• resistance to slipping due to good thixotropic properties
• machine and manual application
• high vapor permeability and crack resistance

Mixing water proportions:
- L / 1 kg
- L / 25 kg

0,18 - 0,19
4,5 - 5,0
Dry mix consumption per 1 mm layer, kg/m², minimum 1,3
The estimated thickness of the plaster layer, mm 10 ... 20
The service life of the mortar mix, h, minimum 2
Vapor permeability, mg/(m∙h∙Pa), not less 0,07
Frost resistance, cycles, not less than 25
Compressive strength limit, MPa, minimum 2,5
Operating temperature, C° -30 ... +70
The manufacturer reserves the right without prior change of the name, parameters, packaging design and other product characteristics. The latest consumer information required by applicable law is found on the packaging.