The concentrate primer is intended for the preparation of various mineral substrates before further finishing – arranging floors, fixing tiles, gluing thermal insulation, plastering. Depending on the type of substrate, the concentrate is diluted with clean water in the recommended ratio of 1:3, 1:5 or 1:10 (see the front side of the label).
Do not use before painting. Do not use undiluted.
| Composition | aqueous dispersion of acrylic polymer, pigment, water |
| Appearance | homogeneous yellow emulsion |
| Thinner | water |
| Dilution proportions (concentrate: water)), L | 1:3
1:5 1:10 |
| Method of application | with a brush, roller, and spray device |
| Density, kg/L | 1,01 – 1,05 |
| Drying time, hours | 2-4 |
| Consumption in diluted form, L | 0,1 – 0,3 |
| The temperature of the base and ambient temperature during a performance of work, ºС | +5 ...+30 |
The concentrate primer is intended for the preparation of various mineral substrates before further finishing – arranging floors, fixing tiles, gluing thermal insulation, plastering. Depending on the type of substrate, the concentrate is diluted with clean water in the recommended ratio of 1:3, 1:5 or 1:10 (see the front side of the label).
Do not use before painting. Do not use undiluted.
| Composition | aqueous dispersion of acrylic polymer, pigment, water |
| Appearance | homogeneous yellow emulsion |
| Thinner | water |
| Dilution proportions (concentrate: water)), L | 1:3
1:5 1:10 |
| Method of application | with a brush, roller, and spray device |
| Density, kg/L | 1,01 – 1,05 |
| Drying time, hours | 2-4 |
| Consumption in diluted form, L | 0,1 – 0,3 |
| The temperature of the base and ambient temperature during a performance of work, ºС | +5 ...+30 |
