POLIMIN RV-55 GAZBETON FIX Adhesive mixture is intended for masonry and puttying of external and internal walls made of precisely sized heat-insulating concretes (gas, foam concretes). The plasticity of the adhesive solution allows you to reduce the thickness of the joints to a minimum, which significantly reduces the likelihood of the formation of “cold bridges”. It can be used for puttying the surfaces of the above-mentioned porous blocks using alkali-resistant glass mesh, which must be embedded in the glue, the thickness of which is no more than 10 mm.
Thanks to the improved formula, the product provides:
√ the plasticity of the masonry solution allows you to build walls by thin-layer gluing, which prevents the formation of cold bridges;
√ the high water-holding capacity of the solution allows you to adjust the position of the block and, if necessary, putty the surface;
√ the strength class M10 allows you to use the solution for the construction of both internal and external walls.
| Water consumption per 25 kg bag, l | 4,5-5,5 |
| Maturation time of the adhesive mixture, min | 3-5 |
| Potency time of the mortar for use, not less than, h | 2 |
| Estimated thickness of the masonry layer, from...to, mm | 2...10 |
| Compressive strength, not less than MPa | 10 |
| Filler fraction, mm | ≤ 1 |
| Chloride content, % | ≤ 0,1 |
| Temperature of the mortar preparation, as well as the base and the environment during operation, from ...to, ºС | +5...+30 |
POLIMIN RV-55 GAZBETON FIX Adhesive mixture is intended for masonry and puttying of external and internal walls made of precisely sized heat-insulating concretes (gas, foam concretes). The plasticity of the adhesive solution allows you to reduce the thickness of the joints to a minimum, which significantly reduces the likelihood of the formation of “cold bridges”. It can be used for puttying the surfaces of the above-mentioned porous blocks using alkali-resistant glass mesh, which must be embedded in the glue, the thickness of which is no more than 10 mm.
Thanks to the improved formula, the product provides:
√ the plasticity of the masonry solution allows you to build walls by thin-layer gluing, which prevents the formation of cold bridges;
√ the high water-holding capacity of the solution allows you to adjust the position of the block and, if necessary, putty the surface;
√ the strength class M10 allows you to use the solution for the construction of both internal and external walls.
| Water consumption per 25 kg bag, l | 4,5-5,5 |
| Maturation time of the adhesive mixture, min | 3-5 |
| Potency time of the mortar for use, not less than, h | 2 |
| Estimated thickness of the masonry layer, from...to, mm | 2...10 |
| Compressive strength, not less than MPa | 10 |
| Filler fraction, mm | ≤ 1 |
| Chloride content, % | ≤ 0,1 |
| Temperature of the mortar preparation, as well as the base and the environment during operation, from ...to, ºС | +5...+30 |
