The PB-45 adhesive mixture is intended for laying external and internal walls from accurately-dimensioned heat-insulating concretes (gas- and foamed concrete), porous ceramic stone or silicate blocks. High plasticity of the adhesive solution allows reducing the thickness of joints to the minimum that prevents the formation of “thermal bypasses”.
| Composition: | cement, mineral fillers, functional additives |
| Color | gray |
| Mixing water proportions | 0,20 - 0,22 L / 1 kg 5,0 - 5,5 L / 25 kg |
| Consumption of the mix with a joint thickness of 3 mm, kg/m² | 6,0 - 7,0 |
| Suitability of the mortar mix, h, minimum | 2 |
| Open time, minute, minimum | 10 |
| Correction time, minutes, minimum | 3 |
| Compressive strength limit, MPa, minimum | 5,0 |
| The temperature of the base and the environmental temperature during application, ºС | +5 ... +30 |
| Shelf life, months | 12 |
The PB-45 adhesive mixture is intended for laying external and internal walls from accurately-dimensioned heat-insulating concretes (gas- and foamed concrete), porous ceramic stone or silicate blocks. High plasticity of the adhesive solution allows reducing the thickness of joints to the minimum that prevents the formation of “thermal bypasses”.
| Composition: | cement, mineral fillers, functional additives |
| Color | gray |
| Mixing water proportions | 0,20 - 0,22 L / 1 kg 5,0 - 5,5 L / 25 kg |
| Consumption of the mix with a joint thickness of 3 mm, kg/m² | 6,0 - 7,0 |
| Suitability of the mortar mix, h, minimum | 2 |
| Open time, minute, minimum | 10 |
| Correction time, minutes, minimum | 3 |
| Compressive strength limit, MPa, minimum | 5,0 |
| The temperature of the base and the environmental temperature during application, ºС | +5 ... +30 |
| Shelf life, months | 12 |
