LC-2 POURING UNDERLAYMENT
LC-2 POURING UNDERLAYMENT
EASY LEVELING SCREED
GRADE STRENGTH IS M300
IT IS CRACK-RESISTANT, MICROFIBER-REINFORCED
IT IS USED FOR HEAT-INSULATED FLOORING WITH THE WATER HEATING ELEMENT
IT IS WATER- AND FROST-RESISTANT

The mixture is used for screed and levelling layer on the concrete bases for high-strength topcoats (self-levelling flooring, epoxy flooring, polyurethane flooring) both outside and inside buildings. It can be used when installing heat-insulated flooring for filling heating elements (water-, electric heating element). When installing floating screeds as part of thermal and sound insulation systems, a layer thickness should be at least 30 mm with reinforcement (metal welded mesh with rectangular cells) or 40 mm without reinforcement. *To save mortar and ensure protection against the occurrence of shrinkage cracks, in the screed with a thickness of more than 40 mm, it is recommended to add a large-sized (not more than half of the layer thickness) filling materials (expanded clay, granite crushed stone or solid bricks) in an amount not exceeding the initial volume of the mortar mix.

Mixing water proportions 0,14 - 0,16 л / 1 кг
3,5 - 4,0 л / 25 кг
Recommended thickness of the levelling layer, mm 8 - 80*
Consumption per 1 mm of the layer, kg/m² 1,9
Shelf life of the mortar for laying, minutes, not less than 20
The term of readiness of the levelling layer after laying, h

- technological passage
- laying of ceramic tiles
- laying of other coatings


1
3
7
Compressive strength at the age of 3/28 days, MPa, minimum 10/30
The temperature of the base and ambient temperature during application, °С +5 ... +30
Shelf life, months 12
The manufacturer reserves the right to change the name, parameters, packaging design and other product characteristics without prior notice. The latest up-to-date consumer information required by applicable law can be found on the packaging.