One-component polyurethane professional gun foam, easy to use, applied using a special applicator (gun) for foam. Designed for professional installation, sealing and soundproofing. Has high adhesion to most materials used in the construction industry, such as polystyrene foam, PVC-U profiles, wood and wood-based materials, mineral surfaces (brick, concrete, plaster), metal. The foam does not “stick” to materials such as silicone, Teflon, polyethylene and polypropylene. The yield of hardened foam depends on operating conditions: temperature, air humidity, the presence of free space for expansion, etc. The cylinder has an updated new generation valve, which helps to increase the shelf life and maintain the quality characteristics of the product for a long time.
| Color | light yellow |
| Working temperature of the base, from ... to, °C | +5 ... +30 |
| Heat resistance (after curing), from ... to, °C | -50 ... +90 |
| Flammability | B3 (DIN 4102) |
| Time to disappear from sticking, min (20°C / rel. humidity 90%) | 4-8 |
| Time after which the cured foam can be cut, min | 45-55 |
| Time to complete curing, h | 24 |
| Dimensional stability after curing max., %:
- testing conditions wet seam - testing conditions dry seam |
± 1.5 ± 5 |
| Maximum joint width, cm | 4 |
| Output from the cylinder, to, l (depending on the temperature and humidity of the environment) | 50 |
| Thermal conductivity, W/(m K) | 0,036 |
| Water absorption after 24 hours in water at partial immersion, kg/m2 | ≤1 |
| Solubility in organic solvents | acetone, before hardening |
| * All measurements were made under normal climatic conditions (+23°C+ 2°C, relative humidity 50 ±5%), unless otherwise stated. |
One-component polyurethane professional gun foam, easy to use, applied using a special applicator (gun) for foam. Designed for professional installation, sealing and soundproofing. Has high adhesion to most materials used in the construction industry, such as polystyrene foam, PVC-U profiles, wood and wood-based materials, mineral surfaces (brick, concrete, plaster), metal. The foam does not “stick” to materials such as silicone, Teflon, polyethylene and polypropylene. The yield of hardened foam depends on operating conditions: temperature, air humidity, the presence of free space for expansion, etc. The cylinder has an updated new generation valve, which helps to increase the shelf life and maintain the quality characteristics of the product for a long time.
| Color | light yellow |
| Working temperature of the base, from ... to, °C | +5 ... +30 |
| Heat resistance (after curing), from ... to, °C | -50 ... +90 |
| Flammability | B3 (DIN 4102) |
| Time to disappear from sticking, min (20°C / rel. humidity 90%) | 4-8 |
| Time after which the cured foam can be cut, min | 45-55 |
| Time to complete curing, h | 24 |
| Dimensional stability after curing max., %:
- testing conditions wet seam - testing conditions dry seam |
± 1.5 ± 5 |
| Maximum joint width, cm | 4 |
| Output from the cylinder, to, l (depending on the temperature and humidity of the environment) | 50 |
| Thermal conductivity, W/(m K) | 0,036 |
| Water absorption after 24 hours in water at partial immersion, kg/m2 | ≤1 |
| Solubility in organic solvents | acetone, before hardening |
| * All measurements were made under normal climatic conditions (+23°C+ 2°C, relative humidity 50 ±5%), unless otherwise stated. |
