GI-4
GI-4 AQUA BARRIER ELAST
ELASTIC WATERPROOFING MIXTURE (COMPONENT 1+2)
COMPONENTS ARE USED TOGETHER
FOR INTERIOR AND EXTERIOR WORKS
WITHSTANDING PRESSURE OF 20 M OF WATER ST.
VAPOR-PERMEABLE

Waterproofing is used for the installation and repair of a waterproof layer on solid concrete, stone and plastered bases both outside and inside premises (bathrooms and showers, swimming pools, basements, etc.) in conditions of both periodic and constant moisture, as well as in structures (pipelines, tanks).

Withstands pressure up to 20 m water column on the pressure side and up to 5 m water column on the pressure side.

Component ratio (dry:liquid) 3,5 : 1
Mixture consumption, kg/m² of coating, from...to 17.5 kg / 5 l
Thickness of waterproofing coating (2 layers), mm, from...to 3,0...4,0
Coating area from the set 22.5 kg (with two-layer coating) m², from...to 4,2...4,5
Suitability of the mortar mixture, min, not less than 120
Ready time after laying, for:
- technological passage, plastering work
-laying ceramic tiles

5
3
Waterproofness in 24 hours, MPa, not less than 0.2
Frost resistance, cycles, not less than 75
Operating temperature, °C, from ... to -30...+70
TThe manufacturer reserves the right to change the name, parameters, packaging design and other product characteristics without prior notice. The most up-to-date consumer information required by applicable law can be found on the packaging.