The mixture is used for waterproofing strong, rigid, non-deformed concrete and plastered bases both outside and inside buildings (bathrooms and shower rooms, basements, etc.) in conditions of periodic moisture.
POLIMIN Gi-1 AQUA-BARRIER is a one-component polymer-cement dry mixture for installing a waterproofing layer behind building structures inside and outside. It is applied from the side exposed to moisture. Important! The material is not a finishing layer, it requires protection from mechanical influences (plastering, tiling, screed).
| Water consumption per 25 kg bag, l: -when applied with a spatula -when applied with a brush |
4.5 ... 5.0 5 0 ... 5 5 |
| Dry mix consumption per 1 mm layer, kg/m², from ... to | 1.7 ... 1.8 |
| Thickness of waterproofing coating (minimum 2 layers), mm, from ... to | 2.5 ... 5.0 |
| Coverage area from a 25 kg bag (with a two-layer coating), m², from ... to | 3 ... 6 |
| Suitability of the mortar mixture, h, not less than | 60 |
| Ready time after laying, for: - technological passage, plastering work - laying ceramic tiles |
2 5 |
| Compressive strength limit, MPa, not less than | 15 |
| Waterproofness in 24 hours, at the age of 7 days, MPa, not less than | 0.05 |
| Frost resistance, cycles, not less than | 50 |
| Operating temperature, °C, from ... to | +5...+30 |
The mixture is used for waterproofing strong, rigid, non-deformed concrete and plastered bases both outside and inside buildings (bathrooms and shower rooms, basements, etc.) in conditions of periodic moisture.
POLIMIN Gi-1 AQUA-BARRIER is a one-component polymer-cement dry mixture for installing a waterproofing layer behind building structures inside and outside. It is applied from the side exposed to moisture. Important! The material is not a finishing layer, it requires protection from mechanical influences (plastering, tiling, screed).
| Water consumption per 25 kg bag, l: -when applied with a spatula -when applied with a brush |
4.5 ... 5.0 5 0 ... 5 5 |
| Dry mix consumption per 1 mm layer, kg/m², from ... to | 1.7 ... 1.8 |
| Thickness of waterproofing coating (minimum 2 layers), mm, from ... to | 2.5 ... 5.0 |
| Coverage area from a 25 kg bag (with a two-layer coating), m², from ... to | 3 ... 6 |
| Suitability of the mortar mixture, h, not less than | 60 |
| Ready time after laying, for: - technological passage, plastering work - laying ceramic tiles |
2 5 |
| Compressive strength limit, MPa, not less than | 15 |
| Waterproofness in 24 hours, at the age of 7 days, MPa, not less than | 0.05 |
| Frost resistance, cycles, not less than | 50 |
| Operating temperature, °C, from ... to | +5...+30 |
