Universal colored grout FUGA STONEMIX is made of high-quality Portland cement and fillers. It is intended for grouting joints in a wide range of 5-15 mm between facing materials made of natural and artificial stone, porcelain stoneware, ceramics, facing bricks and others.
Thanks to a specially developed formula, the product provides:
• stable, persistent color due to the use of high-quality pigments;
• use inside and outside buildings, has frost resistance and resistance to atmospheric precipitation;
• resistance to the appearance of efflorescence, using a special additive that binds cement hydration products;
• joint width from 5 to 15 mm, which allows filling joints in a wide range.
Color – in the assortment. * Sample images are provided for approximate color selection only. Color shades may differ from those shown in original color samples or other advertising brochures.
| The product meets the requirements of European standard EN 13888 | CG2 W |
| Water consumption per 1 kg of dry mix, l | 0.18-0.22 |
| Recommended joint width, mm | 5...15 |
| Suitability of the mortar mix, h, not less than | 1 |
| Water absorption coefficient, kg/m²/h, not more than | 0.5 |
| Frost resistance cycles, not less than | 50 |
| Compressive strength at the age of 28 days, MPa, not less than | 15 |
| Base and ambient temperature during application, ºС | +5 ... +30 |
| Operating temperature, ºС | +5 ... +70 |
Universal colored grout FUGA STONEMIX is made of high-quality Portland cement and fillers. It is intended for grouting joints in a wide range of 5-15 mm between facing materials made of natural and artificial stone, porcelain stoneware, ceramics, facing bricks and others.
Thanks to a specially developed formula, the product provides:
• stable, persistent color due to the use of high-quality pigments;
• use inside and outside buildings, has frost resistance and resistance to atmospheric precipitation;
• resistance to the appearance of efflorescence, using a special additive that binds cement hydration products;
• joint width from 5 to 15 mm, which allows filling joints in a wide range.
Color – in the assortment. * Sample images are provided for approximate color selection only. Color shades may differ from those shown in original color samples or other advertising brochures.
| The product meets the requirements of European standard EN 13888 | CG2 W |
| Water consumption per 1 kg of dry mix, l | 0.18-0.22 |
| Recommended joint width, mm | 5...15 |
| Suitability of the mortar mix, h, not less than | 1 |
| Water absorption coefficient, kg/m²/h, not more than | 0.5 |
| Frost resistance cycles, not less than | 50 |
| Compressive strength at the age of 28 days, MPa, not less than | 15 |
| Base and ambient temperature during application, ºС | +5 ... +30 |
| Operating temperature, ºС | +5 ... +70 |
