The adhesive mixture is intended for fixing natural stone, porcelain stoneware and other facing materials for walls and floors with water absorption from 0.2%, size not exceeding 1000×1000 mm. Allows you to securely fix the facing on concrete, brick and plastered surfaces, both inside and outside buildings. Recommended for facing “warm floors” with water and electric heating, as well as tiles on tiles (do not line the glazed surface). When facing with large-format tiles, it is recommended to use a two-sided (combined) method of applying the adhesive mixture. With the two-sided method, the adhesive solution is applied both to the base and to the back of the facing product, which increases the strength of the tile adhesion to the base. .
***For facing external surfaces with tiles with water absorption less than 0.2%, as well as surfaces exposed to temperatures exceeding +70°C, use adhesive mixture P-22 with the addition of emulsion RC-1. For gluing tiles made of light natural stone or marble, use other mixtures of group “P” according to the intended purpose.
| Water consumption, per 25 kg of dry mix, l | 5.0...5.5 |
| Consumption per 1 mm of layer, kg/m², from | 1.8 |
| Facing area from 1 bag of 25 kg of dry mix (layer thickness 2-3 mm), m² | 6.0 |
| Suitability for use of mortar mixture, h. not less than | 2 |
| Maximum thickness of adhesive layer, mm | 10 |
| Open time, min, not more than | 20 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to concrete base in air-dry conditions, at the age of 28 days, MPa, not less than | 1.2 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, ºС, from...to | -30 ... +150 |
The adhesive mixture is intended for fixing natural stone, porcelain stoneware and other facing materials for walls and floors with water absorption from 0.2%, size not exceeding 1000×1000 mm. Allows you to securely fix the facing on concrete, brick and plastered surfaces, both inside and outside buildings. Recommended for facing “warm floors” with water and electric heating, as well as tiles on tiles (do not line the glazed surface). When facing with large-format tiles, it is recommended to use a two-sided (combined) method of applying the adhesive mixture. With the two-sided method, the adhesive solution is applied both to the base and to the back of the facing product, which increases the strength of the tile adhesion to the base. .
***For facing external surfaces with tiles with water absorption less than 0.2%, as well as surfaces exposed to temperatures exceeding +70°C, use adhesive mixture P-22 with the addition of emulsion RC-1. For gluing tiles made of light natural stone or marble, use other mixtures of group “P” according to the intended purpose.
| Water consumption, per 25 kg of dry mix, l | 5.0...5.5 |
| Consumption per 1 mm of layer, kg/m², from | 1.8 |
| Facing area from 1 bag of 25 kg of dry mix (layer thickness 2-3 mm), m² | 6.0 |
| Suitability for use of mortar mixture, h. not less than | 2 |
| Maximum thickness of adhesive layer, mm | 10 |
| Open time, min, not more than | 20 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to concrete base in air-dry conditions, at the age of 28 days, MPa, not less than | 1.2 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, ºС, from...to | -30 ... +150 |
