Designed for final leveling of walls and ceilings (layer thickness up to 3 mm) indoors before painting, wallpapering, etc. Suitable for creating a simple structural surface. Used on strong cement, cement-lime, lime and gypsum surfaces, concrete, drywall.
Painted with acrylic and other water-soluble paints TM Polimin, or analogues.
| Color white | white |
| Application thickness, mm, from... to | 1...3 |
| Consumption in case of a layer thickness of 1 mm, kg/m², from | 1 |
| Drying time to level 3 (technical characteristics are given for normal conditions (temperature +20±2 °C, humidity 60 ±5%, drying time increases after a decrease in temperature and an increase in air humidity), hours: - before application of the next layer - before sanding |
6 24 |
| Vapor permeability, mg/(m·h·Pa), not less | 0.03 |
| Adhesion strength to the base, MPa, no less | 0.3 |
| The temperature of the base and ambient temperature during application, °С | +5 … +30 |
Designed for final leveling of walls and ceilings (layer thickness up to 3 mm) indoors before painting, wallpapering, etc. Suitable for creating a simple structural surface. Used on strong cement, cement-lime, lime and gypsum surfaces, concrete, drywall.
Painted with acrylic and other water-soluble paints TM Polimin, or analogues.
| Color white | white |
| Application thickness, mm, from... to | 1...3 |
| Consumption in case of a layer thickness of 1 mm, kg/m², from | 1 |
| Drying time to level 3 (technical characteristics are given for normal conditions (temperature +20±2 °C, humidity 60 ±5%, drying time increases after a decrease in temperature and an increase in air humidity), hours: - before application of the next layer - before sanding |
6 24 |
| Vapor permeability, mg/(m·h·Pa), not less | 0.03 |
| Adhesion strength to the base, MPa, no less | 0.3 |
| The temperature of the base and ambient temperature during application, °С | +5 … +30 |
