Intended for primary and repair painting of strong cement-lime, lime and gypsum surfaces, concrete, plasterboard, MDF, chipboard, fiberboard. Has high adhesion to the base, high covering power, resistance to abrasion and biological contamination. Provides “breathing of walls”. Guarantees optimal microclimate inside the premises. It is recommended to use together with lime plaster and Polimin putty (ShV-1, MULTI-FINISH, etc.). In the complex, the system absorbs CO2 from the air. It is used for painting walls inside dry and damp rooms with moderate operational load. Do not use ECOSHTUK MULTI-FINISH and other primers before painting the surface of the putty. The paint is tinted according to the Polіmin Spirit, NCS, RAL, Monicolor catalogs. Base A is white, tinted only in light and pastel colors.
| Color, base A | white/for tinting in pastel colors |
| Solvent | water (can be diluted up to 5%, only after thorough mixing) |
| Density, kg/l | 1.28 |
| Abrasion resistance, class according to ISO 13300 | 2 |
| Consumption, l/m²:
- on absorbent surfaces - on non-absorbent surfaces |
0.12-0.14 0.10-0.12 |
| Content of non-volatile substances (140 °C), % | 47-49 |
| Film thickness for single-layer application, μm, about | 100 |
| Drying time to degree 3 at air temperature 20 ± 2 °C and humidity 60 ± 5%., h, not less than | 2 |
| Resistance to washing, class | 3 |
| VOC content, g/l | ≤ 10 |
| Substrate and ambient temperature during application, ºС | +5 … +30 |
Intended for primary and repair painting of strong cement-lime, lime and gypsum surfaces, concrete, plasterboard, MDF, chipboard, fiberboard. Has high adhesion to the base, high covering power, resistance to abrasion and biological contamination. Provides “breathing of walls”. Guarantees optimal microclimate inside the premises. It is recommended to use together with lime plaster and Polimin putty (ShV-1, MULTI-FINISH, etc.). In the complex, the system absorbs CO2 from the air. It is used for painting walls inside dry and damp rooms with moderate operational load. Do not use ECOSHTUK MULTI-FINISH and other primers before painting the surface of the putty. The paint is tinted according to the Polіmin Spirit, NCS, RAL, Monicolor catalogs. Base A is white, tinted only in light and pastel colors.
| Color, base A | white/for tinting in pastel colors |
| Solvent | water (can be diluted up to 5%, only after thorough mixing) |
| Density, kg/l | 1.28 |
| Abrasion resistance, class according to ISO 13300 | 2 |
| Consumption, l/m²:
- on absorbent surfaces - on non-absorbent surfaces |
0.12-0.14 0.10-0.12 |
| Content of non-volatile substances (140 °C), % | 47-49 |
| Film thickness for single-layer application, μm, about | 100 |
| Drying time to degree 3 at air temperature 20 ± 2 °C and humidity 60 ± 5%., h, not less than | 2 |
| Resistance to washing, class | 3 |
| VOC content, g/l | ≤ 10 |
| Substrate and ambient temperature during application, ºС | +5 … +30 |
