The use of full spatial reinforcement (AER) technology allows the material to be used on substrates subject to large deformations and vibrations, in underfloor heating systems, pool cladding, tanks, balconies, terraces, plasterboard, OSB, fireplaces and stoves. Due to the use of a patented highly dispersed aluminosilicate additive, the adhesive has the ability to accumulate water and allows you to obtain an adhesive mixture with a gel structure.
Thanks to the improved formula and structure of the adhesive-gel, the product provides:
– reliable bonding of porcelain, clinker and terracotta tiles with an area of up to 3 m²* in swimming pools, on facades and open areas;
– an expanded range of working consistency of the solution without draining the solution and splashing the tile;
– increased comfort of application on work surfaces;
– improved filling of voids during bonding, which increases the contact surface;
– leveling the base and gluing facing materials in a wide range from 2 to 15 mm;
– facing “tile on tile” allows you to lay new tiles without removing the old one;
– facing of heated floor systems, using electric and water heating elements;
– facing of fireplaces and stoves, surface heating not higher than +80 ºС;
– facing of deformable surfaces: swimming pools, terraces, balconies, drywall, OSB;
– possibility of use on bases subject to large deformations and vibrations.
| The product meets the requirements of European standard EN 12004 | C2TES1 |
| Water consumption, per 25 kg of dry mix, l | 9.5 - 10.5 |
| Dry mix consumption, kg/ m² / 1 mm, from | 1.1 |
| Facing area from 1 bag of 25 kg of dry mix (layer thickness 2-3 mm), m² | 6.0 |
| Suitability of the mortar mix, hours not less than | ≥2-3 |
| Maximum thickness of the adhesive layer, mm | 2...15 |
| Open time, min, not less than | 30 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to a concrete base in air-dry conditions, at the age of 28 days, MPa, not less than: for ceramic tiles for porcelain tiles (water absorption from 0.2%) |
2.4 2.0 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, °C, from...to | -50...+80 |
The use of full spatial reinforcement (AER) technology allows the material to be used on substrates subject to large deformations and vibrations, in underfloor heating systems, pool cladding, tanks, balconies, terraces, plasterboard, OSB, fireplaces and stoves. Due to the use of a patented highly dispersed aluminosilicate additive, the adhesive has the ability to accumulate water and allows you to obtain an adhesive mixture with a gel structure.
Thanks to the improved formula and structure of the adhesive-gel, the product provides:
– reliable bonding of porcelain, clinker and terracotta tiles with an area of up to 3 m²* in swimming pools, on facades and open areas;
– an expanded range of working consistency of the solution without draining the solution and splashing the tile;
– increased comfort of application on work surfaces;
– improved filling of voids during bonding, which increases the contact surface;
– leveling the base and gluing facing materials in a wide range from 2 to 15 mm;
– facing “tile on tile” allows you to lay new tiles without removing the old one;
– facing of heated floor systems, using electric and water heating elements;
– facing of fireplaces and stoves, surface heating not higher than +80 ºС;
– facing of deformable surfaces: swimming pools, terraces, balconies, drywall, OSB;
– possibility of use on bases subject to large deformations and vibrations.
| The product meets the requirements of European standard EN 12004 | C2TES1 |
| Water consumption, per 25 kg of dry mix, l | 9.5 - 10.5 |
| Dry mix consumption, kg/ m² / 1 mm, from | 1.1 |
| Facing area from 1 bag of 25 kg of dry mix (layer thickness 2-3 mm), m² | 6.0 |
| Suitability of the mortar mix, hours not less than | ≥2-3 |
| Maximum thickness of the adhesive layer, mm | 2...15 |
| Open time, min, not less than | 30 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to a concrete base in air-dry conditions, at the age of 28 days, MPa, not less than: for ceramic tiles for porcelain tiles (water absorption from 0.2%) |
2.4 2.0 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, °C, from...to | -50...+80 |
