POLIMIN P-24 ELASTIC is a polymer-mineral composition based on high-quality cement and modifiers from leading European manufacturers, which contribute to improving the mechanical properties of the solution and its adhesion. Thanks to the use of an improved product formula, it provides: reliable bonding of large-sized porcelain, clinker, terracotta tiles up to 1.5 m2 in total area, the maximum range of adhesive layer thickness (2-10 mm), which allows it to be used for thin-layer bonding of coatings, as well as on uneven substrates, resistant to displacement, allows for cladding from top to bottom, cladding on deforming surfaces: terraces, balconies, cladding of heated floor systems using an electric or water heating element, cladding of swimming pools and tanks, small sizes 1200×1200 mm, 1000×1500 mm.
| The product meets the requirements of European standard EN 12004 | C2TE |
| Water consumption, per 25 kg of dry mix, l | 6.5 ... 7.0 |
| Consumption per 1 mm layer, kg/m², from | 1.3 |
| Facing area from 1 bag of 25 kg of dry mix (layer thickness 2-3 mm), m² | 6.0 |
| Suitability for use of mortar mixture, hours, not less than | 2 |
| Maximum thickness of adhesive layer, mm | 10 |
| Open time, min, not more than | 30 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to concrete base in air-dry conditions, at the age of 28 days, MPa, not less than: for ceramic tiles for porcelain tiles (water absorption from 0.2%) |
1.8 1.2 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, ºС, from...to | -30 ... +70 |
POLIMIN P-24 ELASTIC is a polymer-mineral composition based on high-quality cement and modifiers from leading European manufacturers, which contribute to improving the mechanical properties of the solution and its adhesion. Thanks to the use of an improved product formula, it provides: reliable bonding of large-sized porcelain, clinker, terracotta tiles up to 1.5 m2 in total area, the maximum range of adhesive layer thickness (2-10 mm), which allows it to be used for thin-layer bonding of coatings, as well as on uneven substrates, resistant to displacement, allows for cladding from top to bottom, cladding on deforming surfaces: terraces, balconies, cladding of heated floor systems using an electric or water heating element, cladding of swimming pools and tanks, small sizes 1200×1200 mm, 1000×1500 mm.
| The product meets the requirements of European standard EN 12004 | C2TE |
| Water consumption, per 25 kg of dry mix, l | 6.5 ... 7.0 |
| Consumption per 1 mm layer, kg/m², from | 1.3 |
| Facing area from 1 bag of 25 kg of dry mix (layer thickness 2-3 mm), m² | 6.0 |
| Suitability for use of mortar mixture, hours, not less than | 2 |
| Maximum thickness of adhesive layer, mm | 10 |
| Open time, min, not more than | 30 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to concrete base in air-dry conditions, at the age of 28 days, MPa, not less than: for ceramic tiles for porcelain tiles (water absorption from 0.2%) |
1.8 1.2 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, ºС, from...to | -30 ... +70 |
