POLIMIN SSB-15 decorative plaster is intended for protection and decoration of strong cement-lime, lime and gypsum plasters, prepared concrete, brick and other mineral surfaces, insulation systems. It is used to create a decorative textured coating “LAMB” when finishing residential, commercial, industrial, warehouse and other buildings. It has a uniform medium-grained texture.
Intended for tinting. Tinted according to the catalogs: Monicolor, RAL, NCS, Spirit. Base A – white, tinted only in light and pastel colors. Base C – transparent, only for tinting in dark and saturated colors. The name of the Base (A/C) is indicated on the packaging.
| Diluter | Water |
| Color | white/for tinting |
| Density, approx., g/cm3 | 1.75 – 1.95 |
| Texture appearance | "lamb's fur" |
| Consumption, kg/m² | 2.5–2.7 |
| Surface film formation time, min | 15 |
| Adhesion strength to the base, not less than MPa | 0,3 |
| Drying time, hours | 24 |
| Water permeability, no more than, kg/m² h | 0,2 |
| Base and ambient temperature during operation, ºС | +5...+30 |
| *Maximum plastering area from one bucket of 25 kg, up to, m² | 10 |
POLIMIN SSB-15 decorative plaster is intended for protection and decoration of strong cement-lime, lime and gypsum plasters, prepared concrete, brick and other mineral surfaces, insulation systems. It is used to create a decorative textured coating “LAMB” when finishing residential, commercial, industrial, warehouse and other buildings. It has a uniform medium-grained texture.
Intended for tinting. Tinted according to the catalogs: Monicolor, RAL, NCS, Spirit. Base A – white, tinted only in light and pastel colors. Base C – transparent, only for tinting in dark and saturated colors. The name of the Base (A/C) is indicated on the packaging.
| Diluter | Water |
| Color | white/for tinting |
| Density, approx., g/cm3 | 1.75 – 1.95 |
| Texture appearance | "lamb's fur" |
| Consumption, kg/m² | 2.5–2.7 |
| Surface film formation time, min | 15 |
| Adhesion strength to the base, not less than MPa | 0,3 |
| Drying time, hours | 24 |
| Water permeability, no more than, kg/m² h | 0,2 |
| Base and ambient temperature during operation, ºС | +5...+30 |
| *Maximum plastering area from one bucket of 25 kg, up to, m² | 10 |
