POLIMIN P-20 THERMO FACADE ARM adhesive mixture is used to protect the insulation (implementation of a reinforcing layer), as well as to fasten polystyrene foam insulation boards, including graphite, and mineral wool in insulation systems for buildings and structures. Types of bases: concrete of all categories, aerated concrete, cement and cement-lime plasters, unplastered walls made of hollow and solid brick, sandstone, ceramic blocks.
Thanks to the improved formula, the material provides:
• long open time of the adhesive mixture and resistance to displacement, which ensure gluing and adjustment of the insulation position for a long time (up to 20 minutes);
• high plasticity of the solution, which facilitates the application of the adhesive mixture to the insulation with a notched trowel;
• optimally selected recipe, which allows you to securely fix insulation boards made of both polystyrene foam and mineral wool;
• the elasticity of the glue is enhanced with microfiber, which increases the operational stability of the system, and therefore its durability.
| Water consumption per 25 kg of dry mix:
- l / 1 kg - l / 25 kg |
0,20 - 0,22 5,0 - 5,5 |
| Dry mix consumption, kg/m²:
- for gluing insulation - for performing a reinforcing layer |
5,5-6,5 5,5-6,0 |
| Maturation time of the adhesive mixture, not less than, min | 3...5 |
| Open time, min, not less than | 20 |
| Adjustment time, not less than, min | 10 |
| Fixing of dowels, not less than, h | 48 |
| Initial adhesion to the concrete base, N/mm² | ≥ 0.25 |
| Adhesion strength to insulation 50 mm thick, types EPS (TR 100) and mineral wool, N/mm² | ≥ 0.08 |
| Substrate and ambient temperature during application, ° C | +5 ... +30 |
POLIMIN P-20 THERMO FACADE ARM adhesive mixture is used to protect the insulation (implementation of a reinforcing layer), as well as to fasten polystyrene foam insulation boards, including graphite, and mineral wool in insulation systems for buildings and structures. Types of bases: concrete of all categories, aerated concrete, cement and cement-lime plasters, unplastered walls made of hollow and solid brick, sandstone, ceramic blocks.
Thanks to the improved formula, the material provides:
• long open time of the adhesive mixture and resistance to displacement, which ensure gluing and adjustment of the insulation position for a long time (up to 20 minutes);
• high plasticity of the solution, which facilitates the application of the adhesive mixture to the insulation with a notched trowel;
• optimally selected recipe, which allows you to securely fix insulation boards made of both polystyrene foam and mineral wool;
• the elasticity of the glue is enhanced with microfiber, which increases the operational stability of the system, and therefore its durability.
| Water consumption per 25 kg of dry mix:
- l / 1 kg - l / 25 kg |
0,20 - 0,22 5,0 - 5,5 |
| Dry mix consumption, kg/m²:
- for gluing insulation - for performing a reinforcing layer |
5,5-6,5 5,5-6,0 |
| Maturation time of the adhesive mixture, not less than, min | 3...5 |
| Open time, min, not less than | 20 |
| Adjustment time, not less than, min | 10 |
| Fixing of dowels, not less than, h | 48 |
| Initial adhesion to the concrete base, N/mm² | ≥ 0.25 |
| Adhesion strength to insulation 50 mm thick, types EPS (TR 100) and mineral wool, N/mm² | ≥ 0.08 |
| Substrate and ambient temperature during application, ° C | +5 ... +30 |
