П-18
П-18 ARM INSULATED FACADE
FOR REINFORCEMENT AND ADHESION OF EXPANDED PLASTIC FOAM (EPS), GRAPHITE PLASTIC FOAM (EPS) AND MINERAL WOOL
FOR REINFORCEMENT AND FIXING
HIGH VAPOR PERMEABILITY
REINFORCED WITH MICROFIBER
WATER-, FROST-RESISTANT

The adhesive mixture is intended for protecting (performing a reinforcing layer) insulation boards made of expanded polystyrene foam of EPS-type, including graphite one, and mineral wool when insulating facades of buildings and structures, for glueing decorative elements made of EPS, as well as fixing insulation in the insulation systems for buildings and structures up to 9 m inclusively. The use of the product in the autumn-winter and winter-spring periods should be carried out in strict accordance with the technological card for the thermal insulation device and the manufacturer’s recommendations.

Water demand per 25 kg of dry mix, L 0,20 - 0,22 L / 1 kg
5,0 - 5,5 L / 25 kg
Dry mix consumption, kg/m²:

for glueing insulation
for arranging the reinforcing layer


5,5-6,5
5,5
Suitability of the mortar mix, h no less than 2
Open time, minutes no less than 20
The temperature of the base and ambient temperature during application, °С +5 ... +30
Operating temperature, ºС -30 … +70
Frost resistance, cycle no less than 50
Shelf life, months 12
The manufacturer reserves the right without prior change of the name, parameters, packaging design and other product characteristics. The latest up-to-date consumer information required by applicable law is in the packaging.