The adhesive mixture is intended for fastening porcelain stoneware and other facing materials for walls and floors with water absorption from 0.2%, size not more than 800×800 mm. Allows you to reliably fix the facing on concrete, brick and plastered surfaces, both inside and outside buildings. Recommended for facing “warm floors” with water heating. When facing with large-format tiles, it is recommended to use a two-sided (combined) method of applying the adhesive mixture. With the two-sided method, the adhesive solution is applied both to the base and to the back of the facing product, which increases the strength of the tile adhesion to the base. For facing surfaces outside, with tiles with water absorption less than 0.2%, it is necessary to use the POLIMIN P-14 adhesive mixture with the addition of the POLININ RC-1 adhesive-elasticizing emulsion.
For gluing tiles made of natural stone, light-colored marble, it is necessary to use other mixtures of the “P” group according to the purpose.
| Water consumption, per 25 kg of dry mix, l | 5.0...6.0 |
| Water consumption with the use of emulsion: water, l emulsion, l |
2.5...3.5 2.0 |
| Consumption per 1 mm of layer, kg/m², from | 1.8 |
| Facing area from 1 bag of 25 kg of dry mix (layer thickness 2-3 mm), m² | 6.0 |
| Suitability for use of the mortar mix, h. not less than | 2 |
| Maximum thickness of the adhesive layer, mm | 10 |
| Open time, min., not less than | 30 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to a concrete base in air-dry conditions, at the age of 28 days, MPa, not less than | 1.2 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, ºС, from...to | -30 ... +70 |
The adhesive mixture is intended for fastening porcelain stoneware and other facing materials for walls and floors with water absorption from 0.2%, size not more than 800×800 mm. Allows you to reliably fix the facing on concrete, brick and plastered surfaces, both inside and outside buildings. Recommended for facing “warm floors” with water heating. When facing with large-format tiles, it is recommended to use a two-sided (combined) method of applying the adhesive mixture. With the two-sided method, the adhesive solution is applied both to the base and to the back of the facing product, which increases the strength of the tile adhesion to the base. For facing surfaces outside, with tiles with water absorption less than 0.2%, it is necessary to use the POLIMIN P-14 adhesive mixture with the addition of the POLININ RC-1 adhesive-elasticizing emulsion.
For gluing tiles made of natural stone, light-colored marble, it is necessary to use other mixtures of the “P” group according to the purpose.
| Water consumption, per 25 kg of dry mix, l | 5.0...6.0 |
| Water consumption with the use of emulsion: water, l emulsion, l |
2.5...3.5 2.0 |
| Consumption per 1 mm of layer, kg/m², from | 1.8 |
| Facing area from 1 bag of 25 kg of dry mix (layer thickness 2-3 mm), m² | 6.0 |
| Suitability for use of the mortar mix, h. not less than | 2 |
| Maximum thickness of the adhesive layer, mm | 10 |
| Open time, min., not less than | 30 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to a concrete base in air-dry conditions, at the age of 28 days, MPa, not less than | 1.2 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, ºС, from...to | -30 ... +70 |
