The adhesive mixture is intended for laying ceramic and porcelain facing materials on stoves, fireplaces, “warm” floors with electric and water heating systems, as well as for facing concrete, brick and other non-deformable bases with facing materials with water absorption of at least 0.5%, indoors and outdoors. Not suitable for fixing marble or other light-colored finishing materials. When facing with large-format tiles, it is recommended to use a two-sided (combined) method of applying the adhesive mixture. With the two-sided method, the adhesive solution is applied to both the base and the back of the facing product, which increases the strength of the tile’s adhesion to the base. For facing surfaces outdoors with tiles with water absorption of less than 0.5%, it is necessary to use the POLIMIN P-11 adhesive mixture with the addition of the POLIMIN RC-1 adhesive-elasticizing emulsion. Allowed for leveling the surfaces of fireplaces and stoves with a layer of up to 10mm before further finishing.
| Water consumption, per 25 kg of dry mix, l | 5.0...6.0 |
| Consumption per 1 mm of layer, kg/m², from | 1.8 |
| Facing area from 1 bag of 25 kg of dry mix (tile 300x300 mm, layer thickness 2-3 mm), m² | 6.0 |
| Suitability for use of mortar mixture, h. not less than | 2 |
| Maximum thickness of adhesive layer, mm | 10 |
| Strength of adhesion to the base after ageing in an air-dry environment, MPa: | minimum 1.0 |
| Open time, min., not less than | 20 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to concrete base in air-dry conditions, at the age of 28 days, MPa, not less than | 1.0 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, ºС, from...to | -30 ... +200 |
The adhesive mixture is intended for laying ceramic and porcelain facing materials on stoves, fireplaces, “warm” floors with electric and water heating systems, as well as for facing concrete, brick and other non-deformable bases with facing materials with water absorption of at least 0.5%, indoors and outdoors. Not suitable for fixing marble or other light-colored finishing materials. When facing with large-format tiles, it is recommended to use a two-sided (combined) method of applying the adhesive mixture. With the two-sided method, the adhesive solution is applied to both the base and the back of the facing product, which increases the strength of the tile’s adhesion to the base. For facing surfaces outdoors with tiles with water absorption of less than 0.5%, it is necessary to use the POLIMIN P-11 adhesive mixture with the addition of the POLIMIN RC-1 adhesive-elasticizing emulsion. Allowed for leveling the surfaces of fireplaces and stoves with a layer of up to 10mm before further finishing.
| Water consumption, per 25 kg of dry mix, l | 5.0...6.0 |
| Consumption per 1 mm of layer, kg/m², from | 1.8 |
| Facing area from 1 bag of 25 kg of dry mix (tile 300x300 mm, layer thickness 2-3 mm), m² | 6.0 |
| Suitability for use of mortar mixture, h. not less than | 2 |
| Maximum thickness of adhesive layer, mm | 10 |
| Strength of adhesion to the base after ageing in an air-dry environment, MPa: | minimum 1.0 |
| Open time, min., not less than | 20 |
| Readiness for jointing, days, not less than | 1 |
| Adhesion strength of ceramic tiles to concrete base in air-dry conditions, at the age of 28 days, MPa, not less than | 1.0 |
| Frost resistance, cycles, not less than | 75 |
| Operating temperature, ºС, from...to | -30 ... +200 |
