The adhesive mixture is intended for laying ceramic and other facing materials with a water absorption of not less than 0.5%, with a size of not more than 400×400 mm on concrete, brick and plastered bases that do not deform, inside and outside the premises. When facing, it is recommended to use a two-sided (combined) method of applying the adhesive mixture. With the two-sided method, the adhesive solution is applied both to the base and to the back of the facing product, which increases the strength of the tile adhesion to the base. For gluing tiles with a water absorption of less than 0.5%, it is necessary to use the POLIMIN P-10 adhesive mixture with the addition of the POLIMIN RC-1 adhesive-elasticizing emulsion.
| Water consumption per 25 kg of dry mixture, l | 5,0...6,0 |
| Consumption of dry mixture kg/m²·1 mm, from | 1,8 |
| Cladding area from 1 bag of 25 kg of dry mixture (layer thickness 2-3 mm), m² | 6,0 |
| Shelf life of the mortar mixture, hours, not less | 2 |
| The maximum thickness of the adhesive layer, mm | 10 |
| Open time, min, no less | 20 |
| Getting ready for sewing seams, days, no less | 1 |
| Adhesion strength to the base in air-dry conditions at the age of 28 days, MPa, not less | 0,8 |
| Frost resistance, cycles, no less | 50 |
| Operating temperature, °C, from...to | -30...+70 |
The adhesive mixture is intended for laying ceramic and other facing materials with a water absorption of not less than 0.5%, with a size of not more than 400×400 mm on concrete, brick and plastered bases that do not deform, inside and outside the premises. When facing, it is recommended to use a two-sided (combined) method of applying the adhesive mixture. With the two-sided method, the adhesive solution is applied both to the base and to the back of the facing product, which increases the strength of the tile adhesion to the base. For gluing tiles with a water absorption of less than 0.5%, it is necessary to use the POLIMIN P-10 adhesive mixture with the addition of the POLIMIN RC-1 adhesive-elasticizing emulsion.
| Water consumption per 25 kg of dry mixture, l | 5,0...6,0 |
| Consumption of dry mixture kg/m²·1 mm, from | 1,8 |
| Cladding area from 1 bag of 25 kg of dry mixture (layer thickness 2-3 mm), m² | 6,0 |
| Shelf life of the mortar mixture, hours, not less | 2 |
| The maximum thickness of the adhesive layer, mm | 10 |
| Open time, min, no less | 20 |
| Getting ready for sewing seams, days, no less | 1 |
| Adhesion strength to the base in air-dry conditions at the age of 28 days, MPa, not less | 0,8 |
| Frost resistance, cycles, no less | 50 |
| Operating temperature, °C, from...to | -30...+70 |
