ADHESIVE
ADHESIVE FOR INSTALLATION OF EXPANDED POLYSTYRENE
IT IS INTENDED FOR GLUING OF EXPANDED PLASTIC FOAM (EPS), GRAPHITE PLASTIC FOAM (EPS) AND MINERAL WOOL
IT IS USED FOR HIGH-RISE CONSTRUCTION
IT HAS A HIGH PLASTICITY
IT HAS A HIGH VAPOR PERMEABILITY
IT IS WATER- AND FROST-RESISTANT

The adhesive mixture is intended for fixing insulation boards made of EPS-type expanded polystyrene, including graphite one, and mineral wool when insulating facades of buildings and structures.

The use of the product in the autumn-winter and winter-spring periods should be carried out in strict accordance with the technological card for the thermal insulation device and the manufacturer’s recommendations.

Water demand per 25 kg of dry mix, L from 5.0 to 6.0
Dry mix consumption, kg/m²: for gluing insulation from 5.5 to 6.5
Suitability of the mortar mix, h minimum 2
Open time, minutes minimum 20
Temperature of the base and ambient temperature during application, °С +5 ... +30
Operating temperature, °С -30 … +70
Frost resistance, cycle minimum 50
Shelf life, months 12
The manufacturer reserves the right to change the name, parameters, packaging design and other product characteristics without prior notice. The latest up-to-date consumer information required by applicable law can be found on the packaging.