PP-2 PROFESIONAL FLOORING IN INDUSTRIAL CONDITIONS (layer 3-15 PP2_Lmm)

  • INTERIOR AND EXTERIOR WORKS
  • COMPRESSIVE STRENGTH 30MPa
  • WATERPROOF, FROSTRESISTANT
  • WEARRESISTANT
  • SELFLEVELING

 

COMPOSITION AND APPLICATION

Polymineral composition on the basis of high quality mineral adhesives and modifiers of leading European manufacturers that facilitate enhancement of mechanical properties of solution.

Mix is used for final leveling and construction of floor covering in warehouses, basements, factory workshops, shops; under dry and humid operational conditions provided with increased requirements to strength and wear resistance. Movement of pneumatic driven loading machines and automotive transport is allowed. May be used for repair of concrete, cement-sand and rock floor bases, staircases, etc. It is possible to paint ready surface with paints for concrete or colour solution (or dry) mix with alkali resistant pigments.

SPECIFICATIONS

  • Water requirement for 25 kg bag, l    –    4.2…4.5
  • Recommended floor thickness, mm, from…to    –   3…15
  • Dry mix consumption, kg/m2   1 mm   –   1.8
  • * Coating area of 1 bag (25 kg) of dry mix, with 3 mm layer thickness, by m2    –    4.0
  • Applicability of solution mix for usage, min.    –    20
  • Readiness period after leveling layer application:
    • before technical processing, h   –  36
    • application of coatings with water based adhesives (cladding of ceramic tiles, etc.), days    –    3
    • same (including painting, parquet flooring) with organic based adhesives – after achievement of design humidity and strength, but not until, days   –   4
  • Solution compression strength limit, in period 3 days/ 28 days, MPa, not less   –  10/30
  • Contraction in 28 days, mm/m, not more   –  1
  • Freeze resistance, cycles, not less   –   100
  • Wearing property, g/cm2 , not more   –   0.4

Average consumption: bag 25 kg for 4  m2