LC-4 LEVELER HIGHT-FLUIDITY SELF-LEVELING UNDERLAYMENT LEVEL LC4_LFLOORS FROM 3 TO 15 MM (0,12 TO 0,59 INCH)

  • INTERIOR WORKS
  • HIGH ADHESION TO SURFACES
  • COMPESSIVE STRENGTH 20 MPA
  • CRACK RESISTANT
  • WEAR RESISTANT

COMPOSITION AND APPLICATION

Polymineral composition on the basis of high quality mineral adhesives and modifiers of leading European manufacturers that facilitate enhancement of mechanical properties of solution.

Mix is used in dry premises for construction of leveling layer on concrete and cement-sand bases for floor covering, which will be manufactured of single-piece or roll materials (ceramic and other tiles, parquet, laminate, linoleum, industrial carpet and etc.). It may be used as individual covering on hard prepared surfaces in residential premises, offices, storages, garrets, in civil and administrative construction for average loading (3-15 mm thickness). It is strictly prohibited to construct Polimin ЛЦ-4 poured floor in premises with high humidity and humid process conditions.

SPECIFICATIONS

  • Water requirement for 25 kg bag, l  –      5.0…5.5
  • Recommended floor thickness, from…to, mm  –  3…15
  • Dry mix consumption, kg/m2 . 1 mm   –  1.8
  • * Coating area of 1 bag (25 kg) of dry mix, with 3 mm layer thickness, by m2      –       4.6
  • Readiness period after leveling layer application:
    • before technical processing, h    –   36
    • application of coatings with water based adhesives (cladding of ceramic tiles, etc.), days    –    7
    • same (including painting, parquet flooring) with organic based adhesives – after achievement of design humidity and strength, but not until, days  –  10
  • Solution compression strength limit, MPa, not less, in period 28 days     –       20

Average consumption: bag 25 kg for 4,6 m2