ЛЦ-2LC-2 PRO POURING UNDERLAYMENT LEVEL FLOORS FROM 3 TO 80 MM (0,12 TO 3,15 INCH) IN ONE POUR

  • INTERIOR AND EXTERIOR WORKS
  • COMPRESSIVE STRENGTH 30MPa
  • ROR FLOOR HEATING SYSTEMS
  • WATERPROOF, FROSTRESISTANT
  • CRACK RESISTANT

COMPOSITION AND APPLICATION

Polymineral composition on the basis of high quality Portland cement and modifiers of leading European manufacturers that facilitate enhancement of mechanical properties of solution.

Mix is used for screed and leveling of layer construction on concrete bases for final coatings of enhanced strength (poured floor, epoxy, polyurethane) both inside and outside of buildings. Also, it may be used to pour heating elements when constructing heat-insulated floor. When constructing floating screeds as the part of thermal insulation system, layer thickness must not be less than 30 mm with reinforcement (metal weld mesh with rectangular cells) or 40 mm without reinforcement.

SPECIFICATIONS

  • Water requirement for 25 kg bag, l     –   3.5…4.0
  • Recommended leveling layer thickness, from…to, mm  –  5…80*
  • Dry mix consumption, kg/m2   1 mm  –    1.9
  • ** Coating area of 1 bag (25 kg) of dry mix, with 10 mm layer thickness, by m2     –      2.6
  • Applicability of solution mix, h, not less      –        1
  • Readiness period after leveling layer application:
    • before technical processing, h   –  24
    • before cladding of ceramic tiles and unsupported linoleum, days    –      3
    • before laying of laminated floor, parquet, painting – after achievement of design humidity and strength, but not until, days      –      7
  • Solution compression strength limit, MPa, not less, in period 3 days/ 28 days       –     10/30
  • Contraction in 28 days, mm/m, not more       –    1
  • Freeze resistance, cycles, not less    –    50

Average consumption: bag 25 kg for 1,3 m2