SHC1_LShC-1 CEMENT “SPLATTER” STRENGTHENING PLASTER

  • INTERIOR AND EXTERIOR WORKS 
  • INCREASED ADHESION TO SURFACES
  • WATERPROOF
  • FROST RESISTANT
  • CRACK RESISTANT

COMPOSITION AND APPLICATION

Polymineral composition on the basis of high quality cement and modifiers of leading European manufacturers that facilitate enhancement of mechanical properties of solution and its adhesion.

Applied to ensure enhanced adhesion of plaster coatings to low absorbing bases and leveling of non-uniformity and adsorbing ability of plastered surface. Because of high adhesion with mineral bases it is used to execute high quality plaster works on different hard surfaces (concrete, silicate bricks) without addition base processing.

SPECIFICATIONS

  • Water requirement for 25 kg of dry mix, l – 4.0…5.0
  • Dry mix consumption for 1 mm layer, kg/m2, starting from  – 1.5
  • *Plastering area of 1 bag (25 kg) of dry mix, (layer thickness 10 mm), m2  – 5.5
  • “Splatter” design layer thickness, mm, up to – 3
  • Smooth plaster layer thickness, from…to, mm  – 10…20
  • Applicability of solution mix, hours, not less – 1
  • Readiness for following works, days, not until – 1
  • Strength of adhesion with base under dry air conditions, MPa, not less – 0.6
  • Compression strength limit, MPa, not less – 10.0
  • Freeze resistance, cycles, not less – 75
  • Operational temperature, °С –  -30…+70

Average consumption: bag 25 kg for m2