P9_LP-9 CERAMIC ADHESIVE FOR FASING TILES

  • BREAKING STRENGTH 0.5 MPa
  • VERTICAL SHIFT RESISTANT
  • WATERPROOF
  • PLASTIC

 

Application
The adhesive mixture is intended for laying ceramic tiles and other materials with water absorption not less than 3%, no larger than 300×300 mm on concrete, brick and stucco nondeformable indoor base. Can be used as a mortar for masonry.

Technical characteristics

  • Water demand per 25 kg bag, l – 4,5…5,0
  • Suitability of mortar, h, no less – 2
  • Maximum thickness of the adhesive layer, mm – 10
  • Open time, min, not less than – 15
  • Ready for grouting, day, not earlier – 1
  • Adhesion to the base, MPa, not less – 0,5

Consumption table

Size of facing tiles, mm Size of trowel tooth, mm Jointing seam width, mm Average consumption, kg/m2
50х50 3 1,5 1,8
100х100 4 2,0 2,0
150х150 6 3,0 2,5
150х200 6 3,0 3,0
200х250 8 3,0 3,5
200х300 8 4,0 3,7
250х300 8 4,0 4,0
300х300 10 4,0 4,2
400х400 10 6,0 5,0
600х600 12 8,0 5,0

Average consumption:  bag 25 kg for 6 m2