P25_LP-25 SUPERELASTIC TILE ADHESIVE FOR POOLS AND TERRACES

  • INTERIOR AND EXTERIOR WORKS
  • BREAKING STRENGTH 1.8* MPa
  • INCREASED ELASTICITY
  • SHIFT RESISTANT
  • WATERPROOF, FROST RESISTANT

COMPOSITION AND APPLICATION

Supercement and modifier based mineral polymeric composite from major European manufacturers improving the mechanical and adhesion characteristics of mix.

The adhesive mix is used for the facing of water pools, deformable substrates (porches, balconies, heated floors, or gypsum plasterboards), and high density surfaces (asbestos slate etc.) with different tiles. Effective for the “tile on tile” facing and for the adhesion of decorative polystyrene foam and polyurethane slates.

SPECIFICATIONS

  • Water requirement per 25 kg of dry mix, l      –    7.5…8.5
  • Dry mix consumption for 1mm layerkg/m2.starting, from   –  1.2
  • *Adhesion bond strength (tear propagation strength) in air-dry conditions, MPa, not less than:
    • for ceramic tiles   –  1.8
    • for GRES tiles (water absorption from 0.2%)   –  1.5
  • **Facing area per 25 kg of dry mix, (tile 300×300 mm, layer thickness 2-3 mm), m2    –   7.0
  • Suitability of mortar mix, hrs, not less than     –    1
  • Maximum adhesive coat thickness, mm   –   10
  • Correction time, min, not less than    –    20
  • Pointing readiness, days, not sooner than     –     1
  • Freeze resistance, cycles, not less than   –  75
  • Operational temperature, °C   –    -30…+70

Consumption table

Size of facing tiles, mm Size of trowel tooth, mm Jointing seam width, mm Average consumption, kg/m2
50х50 3 1,5 1,8
100х100 4 2,0 2,0
150х150 6 3,0 2,5
150х200 6 3,0 3,0
200х250 8 3,0 3,5
200х300 8 4,0 3,7
250х300 8 4,0 4,0
300х300 10 4,0 4,2
400х400 10 6,0 5,0
600х600 12 8,0 5,0

Average consumption:  bag 25 kg for 7 m2