P23_LP-23 WHITE ADHESIVE FOR MARBLE, GLASS AND MOSAIC

  • EXTERIOR AND INTERIOR WORKS 
  • BREAKING STRENGTH 1.6* MPa
  • SHIFT RESISTANT
  • WATERPROOF, FROST RESISTANT
  • HIGH PLASTICITY

COMPOSITION AND APPLICATION

Supercement and modifier based mineral polymeric composite from major European manufacturers improving the mechanical and adhesion characteristics of mix.

The adhesive mix is used for the fixation of marble tiles or tiles of other, mainly light or transparent finishing materials, with different nondeformable substrates, both inside and outside the buildings.

SPECIFICATIONS

  • Water requirement per 25 kg of dry mix, l     –     5.0…6.0
  • Dry mix consumption for 1 mm layer, kg/m2, starting from   – 1.8
  • *Adhesion bond strength (tear propagation strength) in air-dry conditions, MPa, not less than:
    • for ceramic tiles   –  1.6
    • for GRES tiles (water absorption from 0.2%)    –   1.0
  • **Facing area per 25 kg bag of dry mix, (tile 300×300 mm, layer thickness 2-3 mm), m2    –  6.0
  • Suitability of mortar mix, hrs, not more than    –   1
  • Maximum adhesive coat thickness, mm    –  10
  • Correction time, min, not less than   –     20
  • Pointing readiness, days      –     1
  • Freeze resistance, cycles, not less than    –   75
  • Operational temperature, °C      –   -30…+70

Consumption table

Size of facing tiles, mm Size of trowel tooth, mm Jointing seam width, mm Average consumption, kg/m2
50х50 3 1,5 1,8
100х100 4 2,0 2,0
150х150 6 3,0 2,5
150х200 6 3,0 3,0
200х250 8 3,0 3,5
200х300 8 4,0 3,7
250х300 8 4,0 4,0
300х300 10 4,0 4,2
400х400 10 6,0 5,0
600х600 12 8,0 5,0

Average consumption:  bag 25 kg for 6 m2