The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 600×600 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 400×400 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 600×600 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 400×400 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 600×600 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 400×400 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 600×600 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 400×400 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
Composition: | cement, mineral fillers, functional additives |
Mixing water proportions | 0,20 - 0,22 L / 1 kg 5,0 - 5,5 L / 25 kg |
Consumption per 1 mm of the layer, kg/m² | about 1,4 |
Time of using the mix, min | about 120 |
Open time, minutes | minimum 20 |
Easy pedestrian movement, h, not earlier than | until 24 |
Strength of adhesion to the base after ageing in an air-dry environment, MPa | minimum 1,0 |
Shelf life, months | 12 |
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 600×600 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 400×400 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 600×600 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 400×400 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 600×600 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 400×400 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 600×600 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
The adhesive mixture is intended for laying ceramic and other facing materials with water absorption of at least 3 %, with a size not exceeding 400×400 mm on concrete, brick and plastered non-deformable bases inside and outside the premises.
Composition: | cement, mineral fillers, functional additives |
Mixing water proportions | 0,20 - 0,22 L / 1 kg 5,0 - 5,5 L / 25 kg |
Consumption per 1 mm of the layer, kg/m² | about 1,4 |
Time of using the mix, min | about 120 |
Open time, minutes | minimum 20 |
Easy pedestrian movement, h, not earlier than | until 24 |
Strength of adhesion to the base after ageing in an air-dry environment, MPa | minimum 1,0 |
Shelf life, months | 12 |