P11_LP-11 THERMO-ADHESIVE FOR FIREPLACES, STOVES AND “WARM” FLOORS

  • INTERIOR AND EXTERIOR WORKS 
  • BREAKING STRENGTH 1.0 MPa
  • THERMAL RESISTANCE UP TO 1600С
  • SHIFT RESISTANT
  • WATERPROOF, FROST RESISTANT

COMPOSITION AND APPLICATION

Polymineral composition on the basis of high quality cement and modifiers of leading European manufacturers that facilitate enhancement of mechanical properties of solution and its adhesion.

Adhesive mix designated to lay ceramic facing materials on fireplaces, stoves and thermal-insulated floors, also for facing of concrete, brick and plastered non-deformed bases with facing materials with water absorbing ability not less than 1%, both inside and outside of premises.

 

SPECIFICATIONS

  • Water requirement for 20 kg bag, l     –   4.8…5.2
  • Dry mix consumption, kg/m2   1 mm   –   1.8
  • * Facing area of 1 bag (20 kg) of dry mix, (300х300 mm tiles, 2-3 mm layer thickness), m2      –      5,5
  • Applicability of solution mix, hours, not less   –     2
  • Maximum adhesive layer thickness, mm      –      10
  • Correction time, min., not less –  15
  • Reaching of readiness for joint pointing, days, not until –  1
  • Strength of adhesion with base under dry air conditions – 1.0
  • Frost resistance, cycles, not less   –    75
  • Operational temperature, °С  –   -30…+160

Average consumption: bag 20 kg for 5,5 m2