P21_LP-21 WARM FACADE PRO REINFORCING (VANDAL PROOF) ADHESIVE FOR THERMAL INSULATION SLABS IN HIGH-RISE CONSTRUCTION

  • INTERIOR AND EXTERIOR WORKS
  • REINFORCED WITH MICROFIBERS
  • HIGH-STRENGTH
  • VAPOUR-PERMEABLE
  • HIGH ELASTICITY

COMPOSITION AND APPLICATION

High quality cement and modifier based mineral polymeric composition from major European manufacturers improving the mechanical and adhesion characteristics of mix, microfiber reinforced.

Adhesive mix used in waterproof vandalproof reinforcing layer on insulation plates (mineral wool, foam polystyrene). Recommended for gluing insulation plates (mineral wool) during external heat insulation of buildings and structures.

SPECIFICATIONS

  • Water requirement per 25 kg ofd ry mix, l      –    5.0…6.0
  • Adhesive dry mix consumption, kg/m2, up to:
    • for gluing    –   5.5
    • for construction   –   5.0
  • *Coating area per 25 kg bag of dry mix, m2:
    • application onto the insulator in stripes or separate strokes   –   4.0
    • reinforcing layer production   –   5.0
  • Suitability of mortar mix, hours, not less than   –   2
  • Mortar correction time, min, not less than   –  20
  • Water saturation factor, kg/m2. t05, not more than   – 0.5
  • Adhesive bond strength, MPa, not less than    –   1.5
  • Freeze resistance, cycles, not less than   –   75
  • Operational temperature, °C    –    -30…+70

Average consumption: bag 25 kg 5 m2