П-20
П-20 THERMO FACADE ARM
FOR REINFORCEMENT AND ADHESION OF EXPANDED PLASTIC FOAM (EPS), GRAPHITE PLASTIC FOAM (EPS) AND MINERAL WOOL
IT IS USED FOR REINFORCEMENT AND FIXING
IT HAS A HIGH VAPOR PERMEABILITY
IT IS REINFORCED WITH MICROFIBER
IT IS WATER- AND FROST-RESISTANT

The adhesive mix is intended for protecting (performing a reinforcing layer) insulation boards made of expanded polystyrene foam of EPS-type, including graphite one, and mineral wool when insulating facades of buildings and structures, for gluing decorative elements made of EPS, as well as fixing insulation in the insulation systems for buildings and structures. The use of the product in the autumn-winter and winter-spring periods should be carried out in strict accordance with the technological card for the thermal insulation device and the manufacturer’s recommendations.

Water demand per 25 kg of dry mix, L 0,20 - 0,22 L / 1 kg
5,0 - 5,5 L / 25 kg
Dry mix consumption, kg/m²:

for glueing insulation
for arranging the reinforcing layer


5,5-6,5
5,5
Suitability of the mortar mix, h not less than 2
Open time, minutes not less than 20
The temperature of the base and ambient temperature during application, °С +5 ... +30
Operating temperature, ºС -30 … +70
Frost resistance, cycle not less than 50
Shelf life, months 12
The manufacturer reserves the right to change the name, parameters, packaging design and other product characteristics without prior notice. The latest up-to-date consumer information required by applicable law can be found on the packaging.