P-19 WARM FACADE ADHESIVE FOR EXPANDED POLYSTYRENE AND MINERAL P19_LWOOL

      • INTERIOR AND EXTERIOR WORKS
      • FOR HIGH-RISE CONSTRUCTION
      • WATERPROOF, FROST RESISTANT
      • SHIFT RESISTANT
      • VAPOUR-PERMEABLE

 

COMPOSITION AND APPLICATION

High quality cement and modifier based mineral polymeric composition from major European manufacturers improving the mechanical and adhesion characteristics of mix.

Adhesive mix used for the gluing of insulation plates (foam polystyrene and mineral wool) during exterior insulation of buildings and structures. Recommended for multistory housing construction.

SPECIFICATIONS

  • Water requirement per 25 kg of dry mix, l     –     4.5…5.0
  • Dry mix consumption, kg/m2, up to    –    4.5
  • *Coating area per 25 kg bag of dry mix, (applied onto insulator with notched trowel), m2   –   6.0
  • Suitability of mortar mix, hours, not less than  –   2
  • Maximum adhesive layer thickness, mm     –       10
  • Open time, min, not less than  –   20
  • Adhesive insulator strength – cohesive failure of insulator, in, days of hardening   –  7
  • Freeze resistance, cycles, not less than    –   50
  • Operational temperature, °C   –    -30…+70

Average consumptionv: bag 25 kg for 6 m2